讲解CSE 3431程序设计、辅导data留学生程序、C/C++编程语言调试

日期：2020-12-06 06:37

CSE 3431, Fall 2019 Assignment 3

RAY-TRACING

Collaboration: None. If you discuss this assignment with others you should submit their names along

with the assignment material.

For this assignment, you will be building a Ray Tracer using C/C++. The system only needs to handle

the rendering of ellipsoids, with a fixed camera situated at the origin in a right handed coordinate

system, looking down the negative z-axis. Local illumination, reflections, and shadows will also need

to be implemented.

The program should take a single argument, which is the name of the file to be parsed. Make sure your

executable has the name “raytracer.exe”and that we can run it as in the following example:

> raytracer.exe testCase1.txt

We will use a script to generate the outputs for the set of posted test cases. You will get zero

marks if we cannot run this script because your program does not implement the required

specifications.

INPUT FILE

The content and syntax of the file is as follows:

Content:

a. The near plane**, left**, right**, top**, and bottom**

b. The resolution of the image nColumns* X nRows*

c. The position** and scaling** (non-uniform), color***, Ka***, Kd***, Ks***, Kr

*** and the

specular exponent n* of a sphere

d. The position** and intensity*** of a point light source

e. The background color***

f. The scene’s ambient intensity***

g. The output file name (you should limit this to 20 characters with no spaces)

* int ** float *** float between 0 and 1

Syntax:

NEAR <n>

LEFT <l>

RIGHT <r>

BOTTOM <b>

T OP <t>

RES <x> <y>

SPHERE <name> <pos x> <pos y> <pos z> <scl x> <scl y> <scl z> <r> <g> <b> <Ka> <Kd> <Ks> <Kr> <n>

… // up to 14 additional sphere specifications

LIGHT <name> <pos x> <pos y> <pos z> <Ir> <Ig> <Ib>

… // up to 9 additional light specifications

BACK <r> <g > <b>

AMBIENT <Ir> <Ig> <Ib>

OUTPUT <name>

All names should be limited to 20 characters, with no spaces. All fields are separated by spaces. There

will be no angle brackets in the input file. The ones above are used to indicate the fields.

MARKING SCHEME:

? [2] Coding Style (i.e. well designed clean commented code)

? [2] x 12 For each of the given test cases.

? There will be no partial marks given if your program fails to parse the input file or if it does not

produce the correct output.

? We will use a script to generate the outputs for a set of test cases. You will get zero marks

if we cannot run this script because your program does not adhere to given requirements.

(Repeated for emphasis)

INSTRUCTIONS AND CLARIFICATIONS:

- Start working on it early. You will not have time to do it at the last minute.

- Submit your assignment on Moodle following the TA’s instructions. Your submission should

include ALL of the code necessary to compile and run the program, and should not contain any

additional functionality besides what is described below. It should not contain any OpenGL API

calls. You may use OpenGL for displaying the results during your debugging.

- You may use the vector and matrix libraries provided on the course’s web page.

- On the website, you will find two pieces of code. One inverts a 4x4 matrix, and the other writes a

char buffer to a ppm image, which is the expected output of this program.

- The code that inverts a 4x4 matrix expects two 4x4 matrices to be passed in as arguments. The first

matrix will be inverted and the result will be stored in the second matrix. Both matrices are row

order, so you have M[row][column].

- You may use the STL string and vector classes.

- The assignment must be done from scratch. You can only use code provided by the instructor or

the TA as specified in this document. If in doubt, ASK!

- Make sure that your parse routine does not crash based on where the EOF character is.

- Given a reasonable resolution (400x400), your program should take no more than five seconds

(probably less than that) to run when compiled in “release” mode.

- A sphere at position (0,0,0), with scaling parameters (1,1,1) should be centered at (0,0,0) with

radius 1.

- If the eye -ray is constructed using the convention described in class, then when intersecting it with

an object, the closest object is the one with minimum hit time greater than 1. A hit time between 0

and 1 falls between the eye and the near plane, and hence is not a part of the view volume.

- When creating rays from the closest hit point on an object, you need to start them at t = 0.0001, to

avoid false intersections due to numerical errors. In other words you may not want to consider

intersections at time=0.

- For the keys and results we use the following convention: Rays from the eye that hit nothing return

the color of the background, while reflected rays that hit nothing return black (i.e. nothing).

- The template code for saving your image to disk uses the ppm image format. If you do not already

have a program that can read images of this type, you can download, GIMP, IfranView from the

web (www.irfanview.com) or Xnviewgb. These are excellent and free programs for viewing

images, and can amongst others read ppm files.

- The “NEAR” value is an absolute value and represents the distance along the negative z-axis.

- Your code may need to handle hollow spheres, which are “cut” open by the near plane.

- Your code may need to be able to handle lights inside spheres.

- You will be using the following local illumination model:

o PIXEL_COLOR[c] = Ka*Ia[c]*O[c] +

for each point light (p) { Kd*Ip[c]*(N dot L)*O[c]+Ks*Ip[c]*(R dot V)n } +

Kr*(Color returned from reflection ray)

o O is the object color

o [c] means that the variable has three different color component, so the value may vary

depending on whether the red, green, or blue pixel color is being calculated

o The other components of this equation are explained in the lecture notes.

- You should not spawn more than three reflection rays for each pixel, i.e. stop the recursion after 3

bounces.

- When summing over all lights, it is possible for the PIXEL_COLOR value to go above 1. In this

case, the simplest solution is to clamp the value to 1. Do not forget to scale by 255 before creating

the ppm image using the given “save_imageP6()” function in ppm.cpp. “save_imageP3()” is

provided for debugging reasons because it produces a text file that is human readable. The P6

version produces a binary file. Your final program must produce the binary version (P6).

- Make sure that your Visual Studio project is designed to create a “Console Application” or

“Command Line Tool”.

- Make sure you check regularly the forum and the announcements in case the grading or submission

instructions change.